Grade	MFI (I₂) (g/10min) ASTM D1238	Density @23°C (g/cc) ASTM D1505	Tensile @Yield (Kg/cm²) ASTM D638	Elongation @Yield (%) ASTM D638	Flexural Modulus (Kg/cm²) ASTM D790	Izod Impact Strength (J/m) ASTM D256	ESCR ( F50) hrs (10% Igepol) ASTM D1693	VSP (°C) ASTM D1525
Raffia & Monofilament
G-Lene W50A009 W50A009.pdf	0.9	0.952	230	13	8500	-	-	122
G-Lene T50A010 T50A010.pdf	1.0	0.950	230	12	8500	-	-	123
G-Lene Y50A010U Y50A010U.pdf	1.0	0.950	250	10	9000			126
G-Lex W52A009 G-Lex W52A009N W52A009-W52A009N.pdf	0.9	0.952	240	11	9500	-	-	123
G-Lex W52ASR009  G-Lex 52ASR009N W52ASR009-W52ASR009N.pdf	0.45	0.964	260	09	11000	-	-	124
G-Lex W55A004 G-Lex W55A004N W55A004-W55A004N.pdf	0.45	0.955	250	10	10000	-	-	123
Injection Moulding
G-Lene I60A080 I60A080.pdf	8.0	0.960	255	10	9500	70	---	124
G-Lene I62A080U I62A080U.pdf	8.2	0.963	310	7	14000	-	-	128
G-Lene I60U080 I60U080.pdf	8.0	0.960	255	10	9500	70	---	124
G-Lene I62U080U I62U080U.pdf	8.2	0.963	310	7	14000	-	-	128
G-Lene I50A180 I50A180.pdf	20	0.952	230	12	8500	30	---	122
G-Lene I56A200U I56A200U.pdf	20	0.952	260	10	9000	-	-	123
G-Lene I50A250 I50A250.pdf	25	0.952	230	12	8500	30	---	122
Blow Moulding
G-Lex B52A003 G-Lex B52A003N B52A003-B52A003N.pdf	0.42	0.954	240	10	10000	120	> 500	123
G-Lene B53A003U B53A003U.pdf	0.38	0.953	270	7	10000	92	> 80	125
G-Lex B63A003 G-Lex B63A003N B63A003-B63A003N.pdf	0.40	0.963	280	9	12000	350	>24	125
G-Lex B55HM0003 G-Lex B55HM0003N B55HM0003-B55HM0003N.pdf	0.08, I₂₁=11.0	0.954	250	11	10000	-	>1000	124
Pipe
G-Lex E52A003 G-Lex E52A003N E52A003-E52A003N.pdf	0.22, I₅=0.95	0.954	240	10	10000	120	> 500	123
G-Lene P46A010U P46A010U.pdf	0.22, I₅=0.95	0.948	230	12	8700	120	> 48	123
G-Lex E52U003 G-Lex E52U003N E52U003-E52U003N.pdf	0.22, I₅=0.95	0.954	240	10	10000	120	> 500	123
G-Lex P54A001 G-Lex P54A001N P54A001-P54A001N.pdf	0.09, I₅=0.46	0.954	250	11	10000	140	> 500	123
G-lex P52A003 P52A003.pdf	0.05, I₅=0.25	0.952	245	11	10000	280	>1000	123

Grade	MFI (I₂) (g/10min) ASTM D1238	Density @23°C (g/cc) ASTM D1505	Tensile @Break MD/TD (Kg/cm²) ASTM D882	Elongation @Break MD/TD (%) ASTM D882	Tear Strength MD/TD (g/mic) ASTM D1922	Dart Impact Strength (g/mic) ASTM D1709
Film-HM HDPE
G-Lex F55HM0003 G-Lex F55HM0003N F55HM0003-F55HM0003N.pdf	0.09, I₂₁=13	0.954	400/350	400/500	1/5	5
Film-HDPE
G-Lene E45A003 E45A003.pdf	0.6	0.945	400/350	750/900	0.3/4	2

Blown film properties were measured on 25 micron blown film extruded at a blown-up ratio (BUR) 2.5 and Cast film properties were measured on 25 micron film.

Please refer respective grade data-sheet for more details.