LLDPE grade Chart 

	Brand Grade MFI (ASTM D1238) Density (ASTM D1505) Application FILM G-Lenell F20S009 0.9 0.918 Lamination film, liquid pkg, Ind liners,general purpose etc G-Lenell E20AN009 0.9 0.918 Lamination film etc G-Lenell F20A020 1.8 0.918 Lamination film (thin ),cast-cling film EXTRUSION COATING G-Lenell E36A060 6 0.922 Extrusion coating on HDPE fabric ROTO MOULDING G-Lenell R35A042 4.2 0.935 Water storage tanks , big toys etc G-Lenell R35A042 4.2 0.935 Non black water tanks and big outdoor toys MASTERBATCH/ INJECTION MOULDING G-Lenell I24A530 50 0.924 Caps and closures,shopping baskets, master batch etc / Caps and closures,shopping baskets, master batch etc

To Top

1. First Alphabet indicates application like
   • F= Film
   • I=Injection Moulding
   • W=Woven sacks
   • M=Monofilament
   • P=Pipe
   • R=Rotomoulding
   • B=Blow Molding
   • E=Extrusion
   • C=Cable insulation grade
   • J=Jacketing pipe for OFC
   • PB=Black coating compound for steel pipe

     To Top

2. First & Second Digit number indicates density in gm/cm3
3. 3rd Alphabet indicates additives like
   • S=Slip additive
   • A=Antioxidant
   • U=UV stabilizer
   • AN=Without antioxidant/ antiblock
   • D=Metal deactivator
     It also indicates nature of molecular weight like HM=High molecular weight
4. Third & Fourth digit no indicates MFI of the material in gms/10 minutes.
   For e.g
   1. F20S009:- F=Film application
      20=0.920 gm/cm3 (Density)
      S=Slip
      009=0.9 MFI
      
   2. B52A003:- B=Blow molding 52=0.952 gm/cm3 (density)
      A=Antioxidant
      003=0.3 MFI
      

      To Top